Error C1041724 Mounting Exchange Server Database

techno5

Exchange Server databases’ transactions are temporarily stored in transaction log files. At times, you need to remove these files manually, usually when the disk runs out of space or the circular logging is disabled. If you come to such situations, it is recommended to determine that the logs have been committed to database or otherwise will cause problems. The database usually shows Dirty Shutdown state in such cases. However, the other reason for this is that database is corrupt. If it is, you should look for Exchange Recovery solutions.

You can take the following situation when you try to mount an Exchange Server database. In an attempt of mounting the database, you might receive an error as below:

An internal processing error has occurred. Try restarting the Exchange System Manager or the Microsoft Exchange Information Store service, or both.

ID no: c1041724
Exchange System Manager

The mount operation fails after you receive this error message.

Cause

Error c1041724 can be encountered if you have run eseutil /p repair utility on the affected database. At this point if Eseutil log files remain intact and are not removed, the database can fail to start with the above error.

Solution

To isolate the issue, you need to proceed as follows:

1.You need to first check if eseutil /p command was run. To do so, you should run eseutil /mh command for pub1.edb and priv1.edb and check the repair count value. If it is other than ‘0’, this shows that the command was run.
2.From the previous step, you also need to check for the database consistency. If it exists in Clean Shutdown state, which shows that the log files have been committed, you can safely remove the log files from Exchange Server folder, Mdbdata folder to a backup folder and mount the database.
3.If the database shows ‘Dirty Shutdown’ state, it may be because either all the log files have not been committed yet or the database is corrupt. You can wait for sometime to determine if uncommitted transactions is the case. If not, the database is corrupt that you need to restore from backup or by performing soft recovery.

In cases when database remains corrupted with no access to a suitable backup, you can use third-party Exchange Server Recovery utilities. These special applications allow safe extraction of user mailboxes without any modification to the original content. Exchange Recovery utilities provide you interactive design plus impressive features to experience.

Stellar Phoenix Mailbox Exchange Recovery is a complete tool that repairs Exchange database repair systematically. It is a safe and powerful Exchange Server Recovery tool that supports Exchange Server 5.5, 2000 and 2003. The tool can restore mailboxes in individual .pst files, which can be directly accessed in Outlook. The software is enriched with a realistic approach to repair corrupted EDB file in each instance.

How To Use Monitor Event Log With Hardware Software Inventory For Your Business

techno16

You can monitor event logs with hardware software inventory for your business. With businesses getting global and more competitive, it has become more challenging than ever to manage every single detail of any business. Computer and internet are an important part of day-to-day functioning. Most of the functions are completed by using computers and all the networking is through internet. However, managing computer networks offer many challenges. Business owners and managers need some kind of monitoring to protect their business from internal and external forces. However, Microsofts event monitor log modules are not sufficient to provide centralized monitoring. In this regard, one can use carefully designed software to monitor event logs.
Monitoring event log with hardware and software inventory reduces all the stress related to managing a smooth business. Following are some issues handled by monitoring event log for your business.

Reduce server and PC downtime
Monitoring event log with hardware and software inventory can reduce the costs associated with network downtime. This system offers proactive acting against any critical errors or system warnings. It prevents data loss by having appropriate backups.

Recover quickly from viruses and hackers
You need to protect your business from the attack of viruses, hackers and Trojans. This system offers you the centralized mechanism that helps you in securing your network. It gives you the ability to recover quickly from these attacks and restore system in clean state. This system tracks and prevents unauthorized access to your business data.
Manage your software license efficiently
This system makes a software inventory of all the software products that are used in your organization. Keeps a log of number of copies of software downloaded in on your network and tracks who is authorizes to use that software. It will help your business save money and prevent any kind of non-compliance issue.
Recover data more rapidly
Every business has to suffer loss of data at some point of time. However, by monitoring event log, you can reduce this loss as it easily backups and restores data in the event of data loss.
Monitor and prevent rogue employees and the damage they create
This is a fact that every business has employees that create trouble if they get opportunity. With an efficient system in work, you can prevent unauthorized access to software and data. It monitors the employees and tracks their attempts to access the data.
Manage authorized and unauthorized software
You can efficiently monitor event logs for any unauthorized access to the software by using software inventory. If you do not want software to run your network, you can prevent anyone from running it on your equipments.
Improve your desktop maintenance
When you are monitoring event log, hardware inventory helps your track any hardware problem and troubleshoot it quickly. It prevents downtime problems. Praetorian Guard is one of the most efficient software to monitor event logs to provide protection for your business.
For more details please log on to www.praetorianguard.net

General Concepts about Object-Oriented Programming

techno2

The programming style that we usually call object-oriented programming (OOP) has appeared relatively recently in the history of programming languages. This is a particular and very convenient style for many situations. It was designed to overcome the limits of structured programming based mainly on the widespread use of procedures, functions, pointers or other more or less developed data types.

Although structured programming is very practical for small software systems or reduced non-graphic applications, it should be avoided when dealing with large applications that use graphic elements where object-oriented programming is recommended. Object orientation means organizing software resources as a collection of distinct and discrete objects, which includes both data structures and their processing functions. This organization is an extension of structured programming in which the data structures and processing functions are only loosely connected. All items have their own identity and are perfectly distinct.

An object is defined as an abstract concept, a specific and useful element for any application. Objects serve two specific purposes:

– they provide a better understanding of the problem to be solved;

– they provide a base design for implementation.

A class of objects encapsulates a certain number of objects with similar properties. This similarity refers to both the description (data and attributes) and the behavior (functions or methods). Attributes are unique features within an object class. Each attribute receives a certain value which can be modified during the objects life cycle. Two or more objects can have the same or different values for the same attribute.

Methods or operations are processing functions applied to objects of a certain class. All objects within a class admit the same set of methods, methods which in return may receive any number of additional parameters. In order to apply various methods to an object, it has to be created (defined). Defining an object is called instantiation. Once an object has fulfilled its mission it is removed.

Abstraction is a fundamental human trait that allows us to build models and thus cope with complexity. In every field of human activity, project approach is based on building a model for a better understanding of the problem to solve. Software engineering makes no exception. Through abstraction the essential key aspects are isolated from the non-essential ones. Therefore, each problem might have several adequate models.

In the software engineering industry, structured programming has made a big step forward defining three perspectives needed in order to properly address any application. These perspectives, also known as models, are: the static model, the dynamic model and the functional model.

There are currently several object-oriented methodologies used for analysis, design and implementation of software resources. One of these modeling methodology is the OMT (Object Modeling Technique) methodology. This method of modeling involves the planning of the various development stages and a graphical representation of objects and their relationships.

Java Programming Training Toronto Brampton Canada

techno2

Stepin2IT is one of the fastest growing training organizations inNorth America. We are committed to be the training provider of choice for individuals and organizations alike. We are a growth-oriented, customer-focused, integrated training organization focused on delivering Hands on IT training which believes in Transforming IT education into job skills. Were a conservatively run organization with a laser sharp focus on delivering IT programs rich in content and one that provides a great value addition to your skill set.
This course is customized to impart training in advanced concepts of Java such as Struts, EJB and Hibernate. Java is a technology that aims to simplify the design and implementation of enterprise applications. STEPIN2IT is one of the best institutes for JAVA & J2EE training as most of our students have been easily managed to find placement right after the training. JAVA & J2EE course is designed as per the Industry standard.

COURSE NAME: JAVA (Advanced) Skills Upgrade Program

COURSE CODE: WEB005

COURSE PREREQUISITES: Basics of Java programming, Windows OS and at least 1 programming language, logic building, OOPS concepts or 1-2 years of basic Java programming experience.

COURSE DURATION: 35 Hrs

COURSE FEE: $750 CDN + HST

Course Objectives: The demand of complex & distributed software development requires full scale programming knowledge of the language while following the standards and industry best practices. This program is designed to bring programmers with limited experience up to speed quickly starting with some frequently used concepts in the industry and progressing into more complex & structured programming concepts. Emphasis is on practicing and implementing the language while building a project resulting in learning the concepts and enabling implementation of the same. It is a fast-paced course with hands-on programming and feedback/facilitation from the Instructor enabling easy learning of the subject while gaining valuable insight into the world of Java programming.

This program is for IT professionals and graduates with some experience in programming and logic building. At least 1-2 years of programming background is required. It is OPEN to people wanting to start a career in Java programming (Some pre requisites may be required like college education or Java Beginner course etc.)

This course is for IT professionals with some knowledge of Manual Testing, Developers, Test Analysts, Testers, Automation Developers, Programmer Analysts & Technical Support resources.

Use Computer Training Directories to Easily Locate What You Need

techno16

If you are looking to receive some sort of computer training, there is little doubt that you feel overwhelmed when searching online to find the training you need. As the internet technology world continues to expand, grow and change with the times, more and more training is required and thus being offered by an increasing number of companies.

The easiest way to find exactly the training you need is to make use of a computer training directory. If you happen to live in the United States there are directories set up that only require that you click on your state to locate local computer training courses designed to help you improve your career. Once you have clicked on your state, you will then be presented with a list of the major cities within the state who offer training courses. If you live outside of the U.S. you can use a directory that asks you to simply type in your location-it will give you a list of results that shows you companies who offer training courses near you.

More and more IT professionals are opting to take online training as it offers them the flexibility to continue working as they learn new skills. Online computer training has become so popular in fact that you can also find great directories that will list the top companies and schools who offer web-based learning.

The IT world is one that is in a constant state of transformation and one in which more complex technologies are constantly being upgraded and improved upon. In order to keep yourself highly desirable to prospective employers and clients it is absolutely imperative that you continuously hone your skills and take the training and certification exams that you need to stay ahead of the competition. Nearly every large corporation on earth today consists of a full internet technology staff of highly training professionals who are in place to ensure that the company’s computer network remains working smoothly twenty-four hours a day. If you would like to become a part of a large corporation in the IT support arena then you must possess the skills and certification that is in demand.

A computer training directory is the first step you should take to find the training you need. These directories are in existence solely to assist people just like you who are striving to compete and who are looking for very specific training courses.

Zoology Science Fair Projects

techno15

Among the topics of interest for students who wish to create zoology science fair projects those that involve ants are the ones most students will choose. A zoology science fair project will demonstrate the knowledge that students have learned regarding some particular type of animal. Ants hold a great fascination for children and adults alike. These amazing little creatures are communal and depend on each other for survival. Very seldom do we see a single ant. This type of living system makes ants a favorite topic for zoology science fair projects. Students can choose any number of subjects related to ants or any other animal to study for their zoology science fair projects.

One of the most interesting subjects that students study using ant populations is in the area of food choice. While most people are familiar with ants as uninvited guests at picnics, most people know very little about these tiny creatures. A zoology science fair project will use different foods to see which flavors, if any, the ants prefer. Students will conduct experiments and collect the data from these experiments in order to make a presentation for the zoology science fair projects. This data will then be used to compare different types of foods. It could then be used in supplemental studies to compare the flavor choices of different types of ants. These little creatures are more than willing to participate in these types of experiments because all that is required of them is that they eat!

Zoology science fair projects can also be performed on microorganisms such as bacteria. The zoology science fair projects can also be based on the osmosis and diffusion that is present in living cells. These types of zoology science fair projects are particularly suited to computer-generated presentations. Since these organisms and processes are too small for the human eye to see, students often have a difficult time grasping the concepts. Zoology science fair projects are a great way to demonstrate these types of scientific phenomenon. The presentations bring to life all the tiny components involved in the life experiences of living creatures. These and many other topics, such as the study of environmental changes for marine life, the effects of chemicals on animals, and how different conditions affect growth rates, can be explored with zoology science fair projects.

Web Site Programming Services Outsourcing To India

techno2

India has become the most favored destination for web site programming outsourcing. Outsourcing to India offers significant advantages such as technological agility, high-quality, skilled workforce, flexibility, cost effectiveness and faster time to market. All kinds of software programming services could be outsourced to India.

Web sites play a dominant role in online business management and is your key to the virtual world. A personal or business web site should be user-friendly and must necessarily have a user-centered design. Splendid images, animations, video, and audio lend attractiveness to websites. Web site programming refers to a series of procedures which involve conceptualization, planning, modeling, and execution of electronic media delivery via Internet in the form of Markup language, which is suitable for interpretation by Web browser and display as Graphical user interface (GUI).

Offshore outsourcing of web site designing services is increasingly becoming popular because of the numerous advantages it offers. Outsourcing website programming services significantly helps in reducing time, effort and money. The modern market has become extremely competitive and product and service life cycle has considerably decreased. This has resulted in up-gradation and maintenance of existing web sites.

Outsourcing programming services provides its customers an extensive range of offshore outsourcing services to cater to your business requirements. Our broad array of Web site programming services include Database driven web-sites, Portal web-sites, E-commerce solutions such as Shopping Cart, Online payments, Web based Applications such as Search engines, Chat, Email, etc., redesigning of an existing website and designing of Static, Dynamic and Flash web-sites for business purposes. Our competitive edge over other outsourcing firms lies in our low-cost effective professional web site maintenance service. At Outsourcing Programming Services, we provide an exclusive range of web site programming and web designing solutions; from professional corporate websites to e-commerce and micro and flash websites.

We have a dedicated team of well-qualified and highly experienced copy writers, visualizers, Graphic Designers, Front-end and Database Programmers who have proven expertise in working with sophisticated, cutting-edge software tools and technologies such as Windows NT and Linux, Photoshop, Corel Draw, Animation S/W, Flash Dreamweaver, Frontpage, Homesite PHP, ASP, Java, Servlets, Applets, EJB, Perl, JavaScript, WAP, MySQL, MSSQL, Oracle and MSAccess. Our advanced technological tools such as multimedia computer systems, scanners, printers, Web promotion techniques and promotion software and 24 hours internet communication help us deliver services promptly as per your specifications.

Outsourcing Programming Services offers its customers an exclusive horde of advantages including 24×7 promotions of your brand and services, effective medium of promotion, highest level of interaction with your company, and a portable, scalable and easily accessible, marketing tool.

A Look At Some Expressive Liberty Cabinet Hardware Collections

techno20

With 70 years in the business, Liberty Hardware has earned the industry’s respect and admiration. Liberty cabinet hardware is decorative and durable, lovely and long lasting. At the forefront of every new design era, Liberty cabinet hardware has the latest and greatest trends down pat. At the same time, you can find plenty of the Liberty cabinet hardware with the classic beauty we’ve all grown to love. Let’s look at some Liberty cabinet hardware collections to see what style is all about.

Bundled Reed knob- The bundled reed is a unique Liberty pulls and knobs design. Charming tied “bundles” decorate the width of these hardware items. These Liberty knobs and pulls can blend into a variety of room settings beautifully.

Blueprint pull- A flat slightly arched bar pull resting on thin rectangular end pegs makes up the Blueprint Liberty pull.

Concentric knob- Concentric circles decorate these Liberty knobs in a brilliant flash of modern meets period.

Dog Bone pull- The Dog Bone Liberty pulls are novel dcor pieces. A flat satin nickel “U” piece has one round end and one squared end, resembling a prehistoric pet treat.

Decorative knob- Decorative Liberty knobs are attractive pieces with ergonomic design. A circular knob head is decorated with flat rings that narrow towards the base for comfortable finger gripping. The shiny satin nickel finish completes the look.

French Huit- French Huit has a distinctly Roman appearance. With bail pulls, ring pulls, bar pulls and knobs, French Huit Liberty hardware is a well-stocked pattern. The back plates of the pulls and the face of the knobs have curved triangular designs that are cut out and raised from the surface. The pulls are decorated with horn-shaped lines cut into the material.

Plaza knob/pull- Nearly the exact design as the level pull, the plaza Liberty pull has a shinier finish, making it perfect for an ultra modern home. These Liberty knobs are flat “L”-shaped knobs that promise easy access to your drawer or cabinet contents.

Retro Curl pull- The picture of contemporary design, the retro curl is a wide “U”-shaped cup pull in satin nickel finish. Use these Liberty pulls to express the modern side of you.

Tapered bow pull- As straightforward as you can get, this simple arched bow pull will tastefully add style to your present room dcor.

Wood round knob- Unfinished wood is a great material for creative and caring homeowners. This is a simple flat round knob on a flat circular base and can be left as is or decorated to the owner’s delight.

Liberty Hardware has also challenged homeowners to live well and beautifully. Express your style with decorative Liberty hardware today.

Forex Trading Robots Vs Manual Trading Which Is Best

techno18

Think a track record with the above printed on it will make you money? Well try it and see!

These automated trading systems are designed to appeal to the greedy or naive investor and they really should know better – making money in any venture is not easy.

There is one advantage you have over any robot – you are capable of independent thought, no computer can think for itself and your brain is an amazing tool – if you use it correctly.

The rewards with manual trading are huge and you need to work smart and get a set of trading rules, to execute your trading system and have the discipline to follow it.

Forex trading offers huge rewards for the effort you need to put in and anyone can learn to trade – it’s just a question of having the right mindset and right forex education.

Today, we marvel at computers and how they have enriched our lives – but in forex trading the appliance of science is not enough, as markets don’t move to set formula’s, there an odds game. However, if you learn how to trade the odds you can win.

So which is best using a forex robot or manual trading?

You know our view its manual trading although we have seen some robots that can make money (they are either expensive or require tremendous discipline) you can make more if you apply yourself correctly.

Forex trading is a challenge and one you win just keep in mind you can win have confidence in your ability and learn currency trading for long term gains and don’t trust anyone else – especially not a forex trading system with a simulated track record!

NEW! 2 X ESSSENTIAL FOREX PDFS PDF

For free 2 x trading Pdf’s, with 50 of essential info and an exclusive forex Trading Course visit our website at:

Cooling a Server Room the Cost-Efficient Way

techno10

As the servers are used constantly, they generate tremendous heat. When this heat increases beyond control, it may lead to damage of the devices and equipment. Being machines, the computers are delicate under the hood and are prone to damage due to carelessness. System crashes, reboots, hang-ups, untimely failures; poor performance and other problems can be created due to abnormal temperatures. Now, one way to keep these issues under control is to maintain the server room’s temperature. Sufficient ventilation, cooling and maintained temperature are the efficient ways to protect computers and servers.

Maintaining the temperature

The computers used at homes and for small offices come with internal cooling devices, which usually keep the desktops and laptops cool. Nevertheless, the server rooms that manage a number of systems do not have sufficient internal cooling systems. They have to be kept cool using an external cooling source, such as portable air-conditioner. Secondly, increased humidity inside the enclosed area can cause corrosion or rust. The maximum humidity level of a server room should not exceed 40 to 50 percent.

Are portable air conditioners good solutions for cooling?

The temperature of the server room should be steadily cool around-the-clock. If the room or storage area is connected to the central cooling systems, they may be shut down during the weekends or sometime late at night, depending upon the company’s working hours. If the cooling systems fail, the computer systems are prone to face the brunt.

Portable air-conditioners keep the server rooms cool, as the temperature can be controlled individually depending upon the outside temperature. There are few air-conditioners that adjust the temperature according to the outside temperature on certain modes. They are self-contained units which do not require permanent installation. Business owners can move these units anywhere as required.

A portable AC used in such places must have condensation tank to manage the humidity level, automatic restart function and proper ventilation to replace the hot air inside the room. These features not only keep the servers cool but also regulate fresh air and keep the machines working continuously. The automatic function keeps the air conditioners working continuously even when there is a power cut or failure.

When it comes to the size of the air conditioners it is never an issue. The server closet of size 9000 to 12000BTU will be sufficient for the unit to fit in. While a 12K BTU unit requires 9 to 12 amps a huge unit of 14000BTU requires 20 amps. The air-conditioner should be thoroughly checked for the necessary requirements before installation.